BBZSK - MOLYKOTE 523 BONDED LUBE
- MSDS: BBZSK
- Manufacturer: DOW CORNING
- Product Name: MOLYKOTE 523 BONDED LUBE
- National Stock Number: 5970-00K000250
Product Identification
Product ID:MOLYKOTE 523 BONDED LUBE
MSDS Date:01/01/1985
FSC:5970
NIIN:00K000250
MSDS Number: BBZSK
Responsible Party
MIDLAND, MI 48640
US
Emergency Phone: 517-496-5900
Info Phone: 517-496-5900
Cage: 5D028
Contractor
Telephone: 517-496-4388
Cage: 71984
Ingredients
METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)
CAS: 71-55-6
RTECS: KJ2975000
Fraction By Weight: 80%
OSHA PEL 350 PPM/450 STEL
ACGIH TLV: 350 PPM/450STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:MAY CAUSE SLIGHT ANESTHESIA,HEADACHES ETC. MAY
IRRITATE EYES.
First Aid
First Aid:INHAL-REMOVE TO FRESH AIR.SKIN/EYES-FLUSH WITH WATER.OBTAIN
MEDICAL ATTENTION.
Fire Fighting
Flash Point:NONE
Lower Limits:8.5
Upper Limits:10.5
Extinguishing Media:WATER FOG
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:MOP,WIPE OR SOAK UP WITH ABSORBENT MATERIAL
USING PROPER PROTECTIVE EQUIPMENT.
Handling
Handling and Storage Precautions:STORE IN COOL DRY PLACE.HANDLE WITH
REASONABLE CARE. PROVIDE ADEQUATE VENTILATION.
Exposure Controls
Respiratory Protection:ORGANIC VAPOR TYPE. SELF CONTAINED BREATHING
GEAR FOR CONCENT. > 2%
Ventilation:LOCAL RECOMMENDED
Protective Gloves:RUBB OR PLASTIC
Eye Protection:SAFETY GLASSES
Other Protective Equipment:AS REGUIRED
Supplemental Safety and Health
Chemical Properties
HCC:T4
Boiling Pt:B.P. Text:165F
Vapor Pres:100
Vapor Density:>1
Spec Gravity:1.35
Evaporation Rate & Reference:<1, ETHER
Solubility in Water:<0.1
Appearance and Odor:LIQUID,ETHER-LIKE ODOR
Percent Volatiles by Volume:>10
Stability
Stability Indicator/Materials to Avoid:YES
WATER(SLOW HYDROLYSIS PRODUCES CORROSIVE ACID)
Stability Condition to Avoid:OPEN FLAME/WELD ARC-PRODUCE HCL AND
PHOSGENE
Hazardous Decomposition Products:FLUORINE,CHLORINE,TRACES OF
INCOMPLETELY BURNED CARBON PROD.
Disposal
Waste Disposal Methods:PLACE ABSORBED MATERIAL IN CONTAINERS SUITABLE
FOR SHIPMENT TO DISPOSAL AREA. FOLL0W ALL LOCAL,STATE & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.